Zubehör

12V Power supply

Some of our components like the Double Axes board, the PWM-5V/10V board or the NET2COM module need an external supply voltage. For this we offer a 12V power supply with colored connectors. The cable of the plug-in power supply has a length of 1.5m. Color:red: +12V DCblack: GNDOverview:Constant voltage Output voltage 12 V Output current max. 1.5 A Power 18 W Operating voltage 230 V/AC Short-circuit proof and protected against overload Positive pole insideBuilt-in EMI filterDetails: Operating current: 1.5 A Manufacturer's color: Black Output current (max.): 1.5 A Protection class: IP44 Input voltage (max.): 264 V Input voltage (min.): 100 V Output voltage (max.): 12 V Weight: 111 g Output voltage (min.): 12 V Power (max.): 18 W Power range: 18 W (max) Operating voltage: 230 V Number of outputs: 1 x Plastic-free packaging: Plastic-free packaging Connection: Open CableHeight: 43 mm Design: Constant voltage Length (depth): 27 mm Max. temperature: 55 °C Width: 73 mm Min. temperature: -35 °C

€10.90*

15 pole screw terminal LC version

Sub-D connector: Sub-D male

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter, the input and output signals can be wired easily and professionally. The connection adapter can be screwed directly to the control and the signals can be tapped at the numbered terminals.The connection adapters are available either as SubD male and female connector.

€14.00*

15 pole screw terminal for DIN rail mounting

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 15-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be connected at the numbered terminals.

€32.00*

15 pole screw terminal for DIN rail mounting Version 1

€32.00*

15-pin pre-assembled Sub-D connection cable

Sub-D connector: Sub-D Male/Male

Sub-D connection cable for connecting the CNC controller to the CNC electronics. The length is 1.8m. The connection cables are optionally available with Sub-D plug/plug or Sub-D plug/socket.

Content: 2 Meter (€5.60* / 1 Meter)

Variants from €8.63*

€11.20*

25 pole screw terminal for DIN rail mounting

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. A short cable for connection to our ncNET or ncUSB module is included in the scope of delivery. A longer, pre-assembled cable can be ordered separately here. The signals can be connected at the numbered terminals.

€35.00*

25 pole screw terminal for DIN rail mounting Version 1

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 25-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

€35.00*

25 pole screw terminal LC version

Sub-D connector: Sub-D female

€16.00*

25-poliges vorkonfektioniertes Sub-D-Anschlusskabel

Sub-D connector: Sub-D Male/Female

Sub-D-Anschlusskabel zum Anschluss von CNC-Steuerung an die CNC-Elektronik. Die Länge beträgt 1,8m.Die Anschlusskabel sind wahlweise mit Sub-D Stecker/Stecker oder Sub-D Stecker/Buchse verfügbar.

Content: 1.8 Meter (€4.79* / 1 Meter)

Variants from €6.40*

€8.63*

3D-Probe

The sensor 3D Probe now features a redesigned housing made of high-quality aluminum.The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.For more information about the auto-levelling function in WinPC-NC with the 3D-Probe and about the probe itself, please refer to the Documentation tab.Scope of delivery:3D-ProbeHolder for 3D-ProbeConnection cable 2m with magnetic connector 25 pole screw terminal for easy connection to control hardware To connect our 3D-Probe and Z-Probe probes to Stepcraft machines, the 3D-Probe/Z-Probe Connector signal adapter is required. https://lewetz.net/en/3D-Z-Probe-Connector-for-Stepcraft-machines/SW10130

€189.00*

3D-Probe and Z-Probe Bundle

The sensor 3D Probe and Z-Probe now features a redesigned housing made of high-quality aluminum.The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws. The Z-Probe surface and length probe can be used both as a flying probe for determining the Z zero point and as a permanently installed probe for determining and correcting tool lengths. For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself, on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and Z-ProbeConnection cable 2m with magnetic connector 25 pole screw terminal for easy connection to control hardwareTo connect our 3D-Probe and Z-Probe probes to Stepcraft machines, the 3D-Probe/Z-Probe Connector signal adapter is required. https://lewetz.net/en/3D-Z-Probe-Connector-for-Stepcraft-machines/SW10130

€299.00*

3D-Probe Version 1

The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.For more information about the auto-levelling function in WinPC-NC with the 3D-Probe and about the probe itself, please refer to the Documentation tab.Scope of delivery:3D-ProbeHolder for 3D-ProbeSpare cover for touch tip made of plasticConnection cable 2m with magnetic connector 25 pole screw terminal for easy connection to control hardware To connect our 3D-Probe and Z-Probe probes to Stepcraft machines, the 3D-Probe/Z-Probe Connector signal adapter is required. https://lewetz.net/en/Adapter-C-change-clock-and-direction-signals/SW10130

€159.00*

3D/Z-Probe Connector for Stepcraft machines

The 3D-Probe/Z-Probe Connector for Stepcraft machines makes it easy to connect our 3D-Probe and Z-Probe probes to the Stepcraft D-, M- and Q-series machines. The connection is made via the screw terminals on the adapter and the cable supplied with the probe. The connections on the adapter are labeled. The adapter can be connected directly to the 15-pin connector for accessories on the Stepcraft machine. There is another 15-pin Sub-D socket on the adapter to which the accessories of the Stepcraft machine can be connected. When used with the Stepcraft accessories plasma, laser and touch probe P100, the probe must be unplugged; simultaneous use of these three accessory components with our probes is not possible. Simultaneous operation of our 3D-Probe with a tool length probe on the audio/jack connector of the Stepcraft machine is also possible. If your Stepcraft machine has a housing, you will also need a 15-pin Sub-D extension cable male/female version for connection. The adapter and all necessary fastening screws are included in the scope of delivery. The Stepcraft CNC machine shown, the 3D probe and Z-probe as well as the connection cable are not included in the scope of delivery of this item.

€12.90*

5-port unmanaged Switch - for ncNET

The ncNET module from WinPC-NC NET can be connected either directly to the control computer or via an existing network hub or switch.If no suitable connection space is available next to the CNC machine, the network can simply be extended plug & play with this unmanaged switch. The switch is specially tested for use with WinPC-NC NET.Details:5x 10/100/1000Mbit/s auto-negotiation RJ45 portsPlug&Play, no configuration necessaryIEEE 802.3x for reliable data flow controlMetal housing for easy installationAuto MDI/MDIX detection, no cross-over cable requiredPacket forwarding rate: 7.4 MBit/sFanlessDimensions 99.8x98x25 mm Scope of delivery:5-port unmanaged network switchOperating instructionsPlug-in power supply unit to supply the network switch3m Ethernet connection cable for the connection from the control computer to the switch

€33.00*

Adapter 2X/2Y for gantry axes

Adapterauswahl: Adapter-2X

As an alternative to the double-axis board, the X or Y axis can each be routed to the clock and direction pins of the 4th axis with the adapters 2X and 2Y. This allows the clock and direction signals of an axis with two motors to be output completely synchronously and fed directly to a 4-axis output stage.

€23.80*

Adapter 422, differential signals

The adapter-422 converts the clock/direction signals into RS422 differential signals, as required e.g. for Berger Lahr or Siemens power amplifiers and can be used with different power amplifiers for higher noise immunity.A + and - output is then available for each signal and the signals are no longer measured against the common GND pin. By using differential signals, interference on the line is reduced.With this adapter, there are no more additional outputs and only four possible inputs. It is ideally used together with the EA160802 expansion card and is already included as standard in our CNCCON S4 and CNCCON W4 controls, but can also be plugged into any other hardware.

€89.25*

Adapter B, signal boost

In all WinPC-NC Professional axis controllers and Posi controllers with simple clock/direction signals, the Adapter B is installed as a booster and ensures that all output signals have a stable 5V level and can be loaded with up to 20mA. The Adapter B can also be ordered separately and retrofitted to the LPT interface on desktop computers, for example.In addition, the adapter B can also be operated with up to 19V and thus output signals suitable for 24V.The Adapter B is supplied with a compatible connection cable for installation in our control system. If you need the Adapter B with a connection cable for a 25 Sub-D, please inform us separately.

€44.00*

Adapter C, change clock and direction signals

For all our controllers and control programmes, the pin assignment regarding the clock/direction signals is fixed and cannot be changed. For all controllers and motor drivers that have a different pin assignment, we offer small cable adapters that adapt the pin assignment.The Adapter C exchanges the clock and direction signals of the individual axes as indicated in the product picture. The Adapter C can simply be plugged between the WinPC-NC hardware and the electronics used.The Adapter C is necessary, for example, for the multi-axis stepper motor output stages MX4660 and MX3660 from Leadshine or the TB6600 output stages.

€23.80*

Adapter SMC800/1500, for SMC800 and SMC1500 stepper motor drivers

With the SMC800/1500 Adaper, SMC stepper motor drivers can also be controlled with clock and direction interfaces. This makes it possible to control SMC stepper motor drivers with modern and up-to-date WinPC-NC variants such as WinPC-NC USB and WinPC-NC Professional. The SMC800/1500 adapter can easily be plugged in between the WinPC-NC hardware and the SMC stepper motor drivers. The SMC800/1500 adapter also allows you to choose between the step resolutions 200, 400 and 800 steps per revolution. In addition, the freely definable inputs and outputs can be used directly on the adapter on the corresponding screw terminals. There are 5 digital inputs for reference switches, level switches or other sensors. Likewise, 4 digital outputs can be connected to screw terminals. These can be used to control a milling spindle, output a speed signal or for many other applications.The price shown here is a special price that is only valid when used with a WinPC-NC licence.

€39.00*

Adapter USB-RS232

To operate WinPC-NC Professional and the serial axis controller, a serial RS232 interface is required on the control computer. If it is not equipped with this, it can easily be retrofitted via this USB adapter. Communication then takes place via a USB connection and is absolutely fast and stable in operation.The adapters we offer are specially tested for use with WinPC-NC Professional and the real-time data transmission required for CNC machining. Scope of delivery: -Adapter USB-RS232 -USB cable 1,5m -Driver on CD

€21.42*

CAT6A patch cable 3m for ncNET and NET2COM

Copper conductor (CU), halogen-free cable sheath (LSZH), 3m blue. Our CAT cables transmit signals in maximum quality at extreme speed and ensure a stable connection. Our connection cables and plugs are characterized by high-quality inner conductors, robust cable sheathing and precisely fitting plugs. Compatible with WinPC-NC USB with nc100 or SC100C adapter. Double-shielded LAN cable with 2x RJ45 connections for connecting network components CAT 6A network cable suitable for 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s S/FTP overall shielding: aluminum foil shielding for individual wire pairs (PiMF) and aluminum braided shielding for the cable jacket High-quality copper conductor (CU) and 3µ gold-plated contact surfaces guarantee an excellent, high-performance network connection. Anti-kink sleeve and robust sheathing provide optimum protection for the Ethernet cable against cable breakage. Latching lug protection on the RJ45 plug prevents the latching lug from snagging or breaking off to ensure a reliable Internet connection. Internet cable is CAT 6A-tested (incl. measurement protocol) and suitable for Power over Ethernet (PoE, PoE+).

Content: 3 Meter (€1.43* / 1 Meter)

€4.29*

Connection Adapter Sorotec C1 and C3 for WinPC-NC

Connection adapter for ncUSB or ncNET module to Sorotec C1 and C3 controllers. A D-SUB cable for connecting the ncUSB or ncNET module to the controller is included in the scope of delivery. The adapter can be used to convert all existing C1 and C3 controllers for the usage with WinPC-NC.

€24.90*

Connection Adapter Stepcraft D Series for WinPC-NC

Connection adapter for ncUSB or ncNET module to Stepcraft D Series machine. A D-SUB cable for connecting the ncUSB or ncNET module to the machine is included in the scope of delivery. The adapter can be used to convert all existing D-Series machines from Stepcraft for the usage with WinPC-NC USB or WinPC-NC NET.

€20.99*

Digital In-/Output extension card EA160802

The EA160802 digital input/output card is the ideal supplement for all industrial positioning and CNC controllers. In addition to 16 opto-decoupled inputs and 8 opto-decoupled outputs, it offers an additional analogue output with 0-10V. The connection of various switches and sensors, the safe switching of peripheral devices, or the control of a spindle speed with an analogue voltage value, all tasks can be solved comfortably with the help of the add-on card EA160802.The EA160802 add-on card is already included in the axis controllers in the industrial version CNCCON W and in all PC-POSI controllers. For other or older axis controllers, it can be ordered here complete with wiring and mounting material and easily retrofitted yourself. The necessary mounting material is included. When ordering the EA160802 card with a controller, we will install it before delivery. If required, several EA extension cards can be plugged together and used. This means that 16 digital inputs and 8 digital outputs are available for each EA expansion card. Overview PC/104 bus, pluggable on axis controller 16 inputs, opto-decoupled 8 outputs, opto-decoupled Voltage +/-10V to +/-30V and thus 24VDC suitable for control cabinets possible Switching times ON <25µs OFF <100µs, max 50mA Max. Current 500mA per channel of the digital outputs Two analogue outputs 0-10V, 8 bit eachMore informations and english manual available on request.

€214.20*